Unixbench RPI 2B
BYTE UNIX Benchmarks (Version 4.1.0)
System -- rpi2.unix7.org
Start Benchmark Run: Sat Mar 9 05:18:46 EET 2019
3 interactive users.
5:18AM up 13:48, 3 users, load averages: 1.33, 4.65, 5.39
-r-xr-xr-x 1 root wheel 142592 Jun 22 2018 /bin/sh
/bin/sh: ELF 32-bit LSB executable, ARM, EABI5 version 1 (FreeBSD), dynamically linked, interpreter /libexec/ld-elf.so.1, for FreeBSD 11.2 (1102500), FreeBSD-style, stripped
/dev/ufs/rootfs 58759676 30042404 28129676 52% /
Dhrystone 2 using register variables 2738950.1 lps (10.0 secs, 10 samples)
Double-Precision Whetstone 773.7 MWIPS (9.8 secs, 10 samples)
System Call Overhead 138273.3 lps (10.0 secs, 10 samples)
Pipe Throughput 129104.8 lps (10.0 secs, 10 samples)
Pipe-based Context Switching 33539.2 lps (10.0 secs, 10 samples)
Process Creation 811.4 lps (30.0 secs, 3 samples)
Execl Throughput 227.3 lps (29.4 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks 58508.0 KBps (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks 11262.0 KBps (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks 11599.0 KBps (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks 16230.0 KBps (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks 10039.0 KBps (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks 5767.0 KBps (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks 188176.0 KBps (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks 12443.0 KBps (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks 12303.0 KBps (30.0 secs, 3 samples)
Shell Scripts (1 concurrent) 569.9 lpm (60.0 secs, 3 samples)
Shell Scripts (8 concurrent) 146.0 lpm (60.0 secs, 3 samples)
Shell Scripts (16 concurrent) 75.6 lpm (60.0 secs, 3 samples)
Arithmetic Test (type = short) 1.0 lps (0.0 secs, 3 samples)
Arithmetic Test (type = int) 1.0 lps (0.0 secs, 3 samples)
Arithmetic Test (type = long) 1.0 lps (0.0 secs, 3 samples)
Arithmetic Test (type = float) 1.0 lps (0.0 secs, 3 samples)
Arithmetic Test (type = double) 1.0 lps (0.0 secs, 3 samples)
Arithoh 1.0 lps (0.0 secs, 3 samples)
C Compiler Throughput 35685.3 lpm (60.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places 35769.3 lpm (30.0 secs, 3 samples)
Recursion Test--Tower of Hanoi 46163.6 lps (20.0 secs, 3 samples)
INDEX VALUES
TEST BASELINE RESULT INDEX
Dhrystone 2 using register variables 116700.0 2738950.1 234.7
Double-Precision Whetstone 55.0 773.7 140.7
Execl Throughput 43.0 227.3 52.9
File Copy 1024 bufsize 2000 maxblocks 3960.0 11599.0 29.3
File Copy 256 bufsize 500 maxblocks 1655.0 5767.0 34.8
File Copy 4096 bufsize 8000 maxblocks 5800.0 12303.0 21.2
Pipe Throughput 12440.0 129104.8 103.8
Pipe-based Context Switching 4000.0 33539.2 83.8
Process Creation 126.0 811.4 64.4
Shell Scripts (8 concurrent) 6.0 146.0 243.3
System Call Overhead 15000.0 138273.3 92.2
=========
FINAL SCORE 75.8
dmesg
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-PRERELEASE #2 r334579M: Tue Jun 5 02:47:49 EET 2018
root@rpi2.unix7.org:/usr/obj/usr/src/sys/RPI2-U7 arm
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT: init without driver.
CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
CPU Features:
Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,
PXN, LPAE, Coherent Walk
Optional instructions:
SDIV/UDIV, UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:2
Cache level 1:
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory = 1023406080 (975 MB)
avail memory = 989605888 (943 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: entropy device external interface
wlan: mac acl policy registered
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> mem 0x3f000000-0x3fffffff on ofwbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff irq 4 on simplebus0
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 5,6,7,8 on simplebus0
gpio0: read-only pins: 46,48-53.
gpio0: reserved pins: 48-53.
gpiobus0: <OFW GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 9 on simplebus0
iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 10 on simplebus0
spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 11 on simplebus0
spibus0: <OFW SPI bus> on spi0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 12,13,14,15,16,17,18,19,20,21,22,23,24 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 25 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 26 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 27 on simplebus0
uart0: console (115200,n,8,1)
vchiq0: <BCM2835 VCHIQ> mem 0xb800-0xb84f irq 28 on simplebus0
vchiq: local ver 8 (min 3), remote ver 8.
pcm0: <VCHIQ audio> on vchiq0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x980000-0x99ffff irq 29 on simplebus0
usbus0 on bcm283x_dwcotg0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
fb0: <BCM2835 VT framebuffer driver> on ofwbus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
fb0: 656x416(656x416@0,0) 24bpp
fb0: fbswap: 1, pitch 1968, base 0x3daac000, screen_size 818688
gpioled0: <GPIO LEDs> on ofwbus0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0xd0
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 64GB <SDHC EC2QT 3.0 SN CC4D570F MFG 04/2017 by 27 SM> at mmc0 41.6MHz/4bit/65535-block
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
Release APs
Trying to mount root from ufs:/dev/ufs/rootfs [rw,noatime]...
WARNING: / was not properly dismounted
WARNING: /: mount pending error: blocks 16 files 55
Warning: no time-of-day clock registered, system time will not be set accurately
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424 product 0x9514> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: local_intc0: MTT enabled
Spurious interrupt detected
uhub1: 5 ports with 4 removable, self powered
ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:db:af:ef
random: unblocking device.
smsc0: chip 0xec00, rev. 0002